Candidate materials
EVA / PE closed-cell foam
PORON polyurethane foam
SEKISUI-type foam families
Silicone foam / rubber
HOME/EXPLORE
Cushioning / Waterproof Sealing
Define the seal path, closed-cell foam, compression ratio and assembly conditions together.
START WITH THE FAILURE MODE
Where can water, dust or vibration pass through the housing?
Define the seal path, closed-cell foam, compression ratio and assembly conditions together.
01Symptom02Cause03Material & process04Verification
Choose the symptom closest to your project below. We then connect it to a cause, a manufacturable route and a verification method.
01 / PROBLEM DIAGNOSIS
What you see is only the symptom.
Open each route to see how the problem becomes a manufacturable, verifiable part.
01WHAT THE CUSTOMER SEESLeakage around corners, joints or screw positions
+
Leakage around corners, joints or screw positions
LIKELY CAUSE
The seal path is discontinuous or compression is uneven.
WANXIN ENGINEERING ROUTE
Map the full seal path and convert closed-cell foam or elastomer with controlled joints.
HOW TO VERIFY
Send this problem to engineeringCompression, recovery, fit and customer product-level water / dust test.
02WHAT THE CUSTOMER SEESFoam creeps, stretches or is difficult to place
+
Foam creeps, stretches or is difficult to place
LIKELY CAUSE
Material firmness, adhesive and liner presentation do not match assembly.
WANXIN ENGINEERING ROUTE
Review foam grade, compression ratio, adhesive surface and liner split.
HOW TO VERIFY
Send this problem to engineeringDimensions, density / thickness, compression set and placement trial.
02 / BUILD THE SOLUTION
Material, process and proof must work together.
Converting route
Through-cut waterproof gaskets and pads
Adhesive lamination and easy-peel liner
Joined or continuous seal paths
Nested layouts for material use
What to verify
Gap and compression ratio
Recovery and repeated loading
Seal path, joints and screw pressure
Water, dust and temperature exposure
03 / HELPFUL PROJECT INFORMATION
Share what you know. Missing details can be confirmed later.
- Seal path / compression / exposure
- Drawing, dimensions and critical tolerances, if available
- Current material, expected volume and target schedule
- Acceptance criteria and required validation
SAMPLE SUPPORT · FAST RESPONSE
Tell us your requirement. Move the project forward.
Start with your contact details and the problem. Add a drawing when available; we respond with the next step and keep progress visible through delivery.
01Initial RFQ response within 1 business hour+
After receiving usable project information, our sales and engineering team confirms receipt and returns the quotation or the specific information still needed.
02Engineering feedback typically within 4 business hours+
Drawing, material, process, tolerance and delivery questions are answered typically within 4 business hours after sufficient technical information is received.
03Project follow-up starts within 1 working day+
Set up the review path, responsible contact, milestones and next actions so purchasing and engineering teams know the current status.
04Sample support for qualified projects+
Sample support is available for qualified projects after drawing, material and construction review. Timing depends on project requirements.
05Visible production progress+
Support progress photos and milestone updates through material preparation, production, inspection, packing and shipment.
SAMPLE SUPPORT · ONE-HOUR QUOTATION RESPONSE
Start with the problem. Add a drawing when available.
Only four fields are required to start. PDF, DXF, DWG, STEP and images are optional. Qualified projects can request sample support.