Candidate materials
PC dust mesh and speaker mesh
Acetate cloth and functional fabric
Light-blocking foam and film
Diffusion film
HOME/EXPLORE
Dust, light & acoustic control
Match mesh, foam, fabric and adhesive construction to the opening, airflow, light path and assembly method.
START WITH THE FAILURE MODE
Is dust, stray light or sound passing through the wrong path?
Match mesh, foam, fabric and adhesive construction to the opening, airflow, light path and assembly method.
01Symptom02Cause03Material & process04Verification
Choose the symptom closest to your project below. We then connect it to a cause, a manufacturable route and a verification method.
01 / PROBLEM DIAGNOSIS
What you see is only the symptom.
Open each route to see how the problem becomes a manufacturable, verifiable part.
01WHAT THE CUSTOMER SEESLight leakage around a display, indicator or camera opening
+
Light leakage around a display, indicator or camera opening
LIKELY CAUSE
The light-blocking wall is too narrow, compression is uneven or the part is misaligned.
WANXIN ENGINEERING ROUTE
Map the light path, then convert black foam or film with controlled inner edges, corner radii and positioning features.
HOW TO VERIFY
Send this problem to engineeringOpening dimensions, placement trial, surface appearance and product light-leakage check.
02WHAT THE CUSTOMER SEESDust mesh lifts or changes airflow / speaker output
+
Dust mesh lifts or changes airflow / speaker output
LIKELY CAUSE
Mesh aperture, adhesive coverage or active opening does not match the product requirement.
WANXIN ENGINEERING ROUTE
Select the mesh or acetate cloth by function, control adhesive keep-out and deliver it on a stable liner.
HOW TO VERIFY
Send this problem to engineeringAdhesion, active opening, contamination, airflow and customer acoustic test.
02 / BUILD THE SOLUTION
Material, process and proof must work together.
Converting route
Mesh and adhesive lamination
Precision windows and opening conversion
Low-tension waste removal
Clean liner-based packing
What to verify
Opening size and active area
Airflow, dust and acoustic target
Light path and visible-edge control
Adhesion and assembly alignment
03 / HELPFUL PROJECT INFORMATION
Share what you know. Missing details can be confirmed later.
- Opening / airflow / light path / sound target
- Drawing, dimensions and critical tolerances, if available
- Current material, expected volume and target schedule
- Acceptance criteria and required validation
SAMPLE SUPPORT · FAST RESPONSE
Tell us your requirement. Move the project forward.
Start with your contact details and the problem. Add a drawing when available; we respond with the next step and keep progress visible through delivery.
01Initial RFQ response within 1 business hour+
After receiving usable project information, our sales and engineering team confirms receipt and returns the quotation or the specific information still needed.
02Engineering feedback typically within 4 business hours+
Drawing, material, process, tolerance and delivery questions are answered typically within 4 business hours after sufficient technical information is received.
03Project follow-up starts within 1 working day+
Set up the review path, responsible contact, milestones and next actions so purchasing and engineering teams know the current status.
04Sample support for qualified projects+
Sample support is available for qualified projects after drawing, material and construction review. Timing depends on project requirements.
05Visible production progress+
Support progress photos and milestone updates through material preparation, production, inspection, packing and shipment.
SAMPLE SUPPORT · ONE-HOUR QUOTATION RESPONSE
Start with the problem. Add a drawing when available.
Only four fields are required to start. PDF, DXF, DWG, STEP and images are optional. Qualified projects can request sample support.