Candidate materials
Thermal pads
Thermally conductive adhesive
Graphite / heat-spreading film
HOME/EXPLORE
Thermal management
Define the gap, contact pressure and heat path before selecting a thermal interface.
START WITH THE FAILURE MODE
Where is heat building up—and what is blocking the path out?
Define the gap, contact pressure and heat path before selecting a thermal interface.
01Symptom02Cause03Material & process04Verification
Choose the symptom closest to your project below. We then connect it to a cause, a manufacturable route and a verification method.
01 / PROBLEM DIAGNOSIS
What you see is only the symptom.
Open each route to see how the problem becomes a manufacturable, verifiable part.
01WHAT THE CUSTOMER SEESProcessor throttling or hot enclosure
+
Processor throttling or hot enclosure
LIKELY CAUSE
An air gap, uneven pressure or poorly matched pad thickness interrupts heat transfer.
WANXIN ENGINEERING ROUTE
Review the stack-up and convert a thermal pad or heat-spreading film to the contact geometry.
HOW TO VERIFY
Send this problem to engineeringCompressed thickness, contact imprint, fit and customer thermal test.
02WHAT THE CUSTOMER SEESPad shifts, wrinkles or interferes during assembly
+
Pad shifts, wrinkles or interferes during assembly
LIKELY CAUSE
The liner, pickup area and part presentation do not match the assembly motion.
WANXIN ENGINEERING ROUTE
Add split liners, peel tabs, positioning features and assembly-ready presentation.
HOW TO VERIFY
Send this problem to engineeringPlacement trial, peel behavior and critical outline dimensions.
02 / BUILD THE SOLUTION
Material, process and proof must work together.
Converting route
Lamination and precision die cutting
Kiss-cut parts on release liner
Prototype geometry by laser
What to verify
Gap and compressed thickness
Contact pressure and surface flatness
Thermal target and operating temperature
03 / HELPFUL PROJECT INFORMATION
Share what you know. Missing details can be confirmed later.
- Gap / thickness / thermal target
- Drawing, dimensions and critical tolerances, if available
- Current material, expected volume and target schedule
- Acceptance criteria and required validation
SAMPLE SUPPORT · FAST RESPONSE
Tell us your requirement. Move the project forward.
Start with your contact details and the problem. Add a drawing when available; we respond with the next step and keep progress visible through delivery.
01Initial RFQ response within 1 business hour+
After receiving usable project information, our sales and engineering team confirms receipt and returns the quotation or the specific information still needed.
02Engineering feedback typically within 4 business hours+
Drawing, material, process, tolerance and delivery questions are answered typically within 4 business hours after sufficient technical information is received.
03Project follow-up starts within 1 working day+
Set up the review path, responsible contact, milestones and next actions so purchasing and engineering teams know the current status.
04Sample support for qualified projects+
Sample support is available for qualified projects after drawing, material and construction review. Timing depends on project requirements.
05Visible production progress+
Support progress photos and milestone updates through material preparation, production, inspection, packing and shipment.
SAMPLE SUPPORT · ONE-HOUR QUOTATION RESPONSE
Start with the problem. Add a drawing when available.
Only four fields are required to start. PDF, DXF, DWG, STEP and images are optional. Qualified projects can request sample support.