CUSTOMER PROBLEM
What made the part difficult?
Corners, screw locations and joints can create uneven compression. Adhesive choice and liner design also affect whether the gasket is positioned correctly.
HOME/CASE STUDY
Closed-cell foam gasket for an electronics enclosure
A closed-cell foam gasket follows the enclosure seal path to support water, dust and vibration control around the housing.
WATERPROOF SEALING
Closed-cell foam gasket for an electronics enclosure
A closed-cell foam gasket follows the enclosure seal path to support water, dust and vibration control around the housing.
01Continuous seal path
02Defined gap and compression ratio
03Corner and joint design
04Water, dust and temperature exposure
02 / ENGINEERING ROUTE
From requirement to a manufacturable construction.
Candidate material stack
EVA / PE closed-cell foam
PORON or SEKISUI-type foam where specified
Silicone foam / rubber for temperature needs
Acrylic adhesive and release liner
DFM review
Review compression around screws and corners
Avoid leak paths at joints
Add liner split or peel tab for placement
Converting process
Foam and adhesive lamination
Precision through-cut or kiss-cut
Waste removal without stretching the gasket
03 / VERIFICATION PLAN
Define acceptance before production.
01
Material grade, density and thickness
02
Outline, joint and hole position
03
Compression and recovery
04
Customer product-level water / dust and IP testing
04 / PROJECT RESULT
What the project handed to the next team.
The result fixes the approved construction, verification checkpoints and delivery standard needed for repeat production.
Seal path, screw clearances and corner compression fixed after sample review
Liner split and presentation defined for placement without stretching the gasket
Product-level water and dust acceptance remains tied to the customer enclosure test
FREE SAMPLE · FAST RESPONSE
Tell us your requirement. Move the project forward.
Start with your contact details and the problem. Add a drawing when available; we respond with the next step and keep progress visible through delivery.
01Quotation response within 1 hour+
After receiving usable project information, our sales and engineering team confirms receipt and returns the quotation or the specific information still needed.
02Workshop / engineering response within 4 hours+
Drawing, material, process, tolerance and delivery questions are passed to the responsible workshop or engineer for a practical answer.
03Project follow-up starts within 1 working day+
Set up the review path, responsible contact, milestones and next actions so purchasing and engineering teams know the current status.
04Free samples in 1–3 days+
Samples are free. For feasible standard projects, samples can be prepared in 1–3 days after drawing and material confirmation.
05Visible production progress+
Support progress photos and milestone updates through material preparation, production, inspection, packing and shipment.
FREE SAMPLE · ONE-HOUR QUOTATION RESPONSE
Start with the problem. Add a drawing when available.
Only four fields are required to start. PDF, DXF, DWG, STEP and images are optional; every project can request samples.